Name: SCHNEIDER MCB 1 POLE
Availability: InStock

SCHNEIDER MCB 1 POLE

Category: Home Appliance

Select variant(s): TYPE, WATT

TYPE:

WATT:

Quantity:

Specifications

Voltage: ~230240 V AC for single-phase circuits

Current Rating (Amp) : Available from a few amps (e.g., 4 A) up to 63 A or more depending on series.

Mounting Type: Standard DIN-rail mounting.

Schneider Electric Acti9 MCB 1P 6 A Curve C – Compact 6 A, type C breaker for small lighting circuits or low-load branches.
Schneider Electric Easy9 1P 16 A C‑Curve MCB – Very common choice (~16 A) for general outlet and lighting protection.
Schneider Electric Easy9 1P 16 A B‑Curve MCB – B-curve version, more sensitive to lower surge currents; useful for purely resistive loads.
Schneider Easy 9 Single Pole MCB – 32 A – Higher-current single-pole breaker (~32 A) for heavier circuits (e.g., water heaters, air handlers).
Schneider Resi9 MCB 1P 32 A Curve C – Another 32 A type C variant in the Resi9 range.
Schneider Electric Acti9 MCB 1P 63 A – Robust 63 A MCB for larger branch or sub-circuits.
Schneider Electric LS Switch 1P 4 A B‑Curve MCB – Lower-load breaker (~4 A) for small lighting or control circuits.
Schneider Electric Acti9 A9K MCB 1P 10 A – Mid-range 10 A type C breaker.

📊 Typical Specifications — Schneider MCB 1 Pole

These are general features common across Schneider single-pole MCBs:

Device Type: Miniature Circuit Breaker (MCB) — overload & short-circuit protection.
Poles: 1P — protects one live conductor.
Rated Voltage: ~230–240 V AC for single-phase circuits.
Rated Current Options: Available from a few amps (e.g., 4 A) up to 63 A or more depending on series.
Breaking Capacity: Typically 6 kA at 230 V AC (many Easy9/Acti9 models) — some higher-capacity ones offer 10 kA.
Trip Curves:
- Type B: trips quickly at lower surges — good for lighting and resistive loads.
- Type C: standard for general usage (lighting + outlets).
- Type D: higher inrush tolerance (motors, high inductive loads).
Mounting: Standard DIN-rail mounting.
Standards: Complies with IEC 60898-1 and often IEC 60947-2 for overload/short-circuit protection.
IP Protection: Usually IP20 (indoor electrical panel use).

Rated Current: Choose closer to the actual circuit load — e.g., 6–10 A for lighting, 16–32 A for outlets or larger loads.
Trip Curve: Type C is the most versatile for mixed usage. Type B is more sensitive, and Type D tolerates higher inrush currents without nuisance trips.
Breaking Capacity: Higher kA ratings (e.g., 10 kA) give better protection in systems with higher fault currents.